Au Ford Brake lights wont work after changing the brake light switch and globes can any one offer help please?

Well if the switch and bulbs are new that leaves fuses and wiring. It%26#039;s easy enough to check the fuses with a 12 volt test light just make sure each fuse has power on both side and then see if you have power to the brake lamp switch and then out of the switch when you press the brake pedal. If you have it to that point see if you have power to the bulbs with the brake pedal pressed if you have that then make sure you have a ground at the bulbs. Beyond that you might want to take it to a shop as tracing bad wiring can be a challenge.|||try changing the fuse as well, if not it might be a dud switch|||check the fuse for the brake lites if the fuse is still good then may i suggest an auto electrician.gl|||Make sure your brake light switch is adjusted correctly, if that%26#039;s ok check the globes again making sure they are the correct type of globe and also make sure the fuse has not blown it would help if you had a test light if all this fails see your auto electrician